Threshold for 5mm and 6 mm Rigid Core Plank – Product and Installation Information

Product Features

  • Used to fill the gap between the floor and carpet, hearths or against sliding doors.
  • Surface: Wear resistant
  • Core Material: Rigid PVC
  • Length: 94″ (238.76 cm)

Installation Procedures

  1. Install the flooring leaving a 1-1/4” gap between the two floor surfaces for the threshold installation.
  2. Measure and trim to fit.
  3. Center the track between the flooring leaving a 1/4” spacing between the track and floor planks. Screw track to subfloor using included screws (or glue down with construction adhesive).
  4. Starting at one end, press the molding into the track inching along the length of the molding. It will NOT snap in all at once. You may also use a rubber mallet.

5mm & 6mm Threshold

Updated on October 26, 2022