T-Mold for Rigid Core Plank – Product and Installation Information

Product Features

  • Used to fill the gap between two floors of equal height.
  • Surface: Wear resistant
  • Core Material: Rigid PVC
  • Length: 94″ (238.76 cm)

Installation Procedures

  1. Install the flooring leaving a 1-1/8” gap between the two floors for the t-molding installation.
  2. Measure and trim to fit
  3. Center the track between the flooring leaving a 1/4” spacing between the track and floor planks. Screw track to subfloor using included screws (or glue down with construction adhesive).
  4. Starting at one end, press the molding into the track inching along the length of the molding. It will NOT snap in all at once. You may also use a rubber mallet.

T-Mold for 5 mm and 6 mm items

Updated on September 28, 2022