Armstrong Flooring S-385 Satinkeeper Low Gloss Floor Finish DATA SHEET

SDS

S-385 Satinkeeper Low Gloss Floor Finish SDS

Do not reuse container. Dispose of container and residue in accordance with federal, state and local waste disposal regulations. Do not flush Satinkeeper residue down drains.

Product Information

Use: Residential
Use For: Armstrong Flooring Residential Vinyl Sheet and Vinyl Tile, Genuine Linoleum, Asphalt Tile, Rubber Tile, Ceramic – although not much value on glazed ceramic; unglazed – other products designed for this use will produce better results, Slate and Terrazzo – other products designed for this use will produce better results
Do Not Use For: Hardwood, Laminate, Cork or Marble Floors or High Gloss Vinyl Flooring
Spread Rate: 375 – 500 sq ft per quart
Available Units: Quart
VOC Content: <1%; California General Consumer Products Rule, California Code of Regulations
Shelf Life: Two years if not opened.
Storage: Keep from freezing.
Manufacturing Location: USA

LanguageEnglish
SizeQuart
Item No.00385601
Item UPC042369372589
DimensionsN/A
Weight14 lbs/ctn
Quantity per Carton6

Product Features

  • Renews worn or dulled floors
  • Protects floor from scuffs, scratches and dirt
  • Does not require buffing
  • Resists harsh detergents
  • Metal cross-linked acrylic copolymer
  • Resists scuffing and water-spotting
  • pH of 8.6
  • 18% solids

Application Instructions

FLOOR PREP:

  • Sweep or vacuum thoroughly
  • Wash with Armstrong Flooring Once ‘n Done Floor Cleaner (Do not use Once ‘n Done on linoleum)

APPLYING POLISH:

  • Initially, apply two thin coats with a clean damp sponge mop or microfiber applicator mop and allow at least 30 minutes drying time between coats
  • Make sure the entire surface is coated
  • Dries in approximately 30 minutes – do not buff
  • In high humidity areas, Satinkeeper may take longer than 30 minutes to dry

ONGOING POLISHING:  

  • Reapply Satinkeeper Floor Finish as needed – 1 or 2 coats at a time
  • If necessary, remove Satinkeeper with Armstrong Flooring New Beginning Floor Stripper & Cleaner. Note: Armstrong Flooring New Beginning Floor Stripper & Cleaner can not be used on linoleum to remove the Satinkeeper. Use a linoleum-safe stripper instead.

NOTE:

  • In high humidity areas, Satinkeeper may take longer than 30 minutes to dry

Product Image

Updated on August 24, 2022