Flush Stairnose for 8mm Laminate – Product and Installation

Flush Stairnose for 8mm laminate finishes the end of a step when installing 8mm TimberTru plank.

Product Features

  • Used to finish the front edge of steps on a staircase
  • Surface material: Wear resistant laminate
  • Core material: Moisture resistant MDF

Materials and Tools:

  • Pencil
  • Tape measure
  • Saw
  • Hammer
  • Nail set
  • Urethane construction adhesive
  • Finish nails
  • Color coordinated filler

Installation Procedures

Step 1: Install the flooring leaving a 2” gap from the end of the step for the stair nose installation.

Step 2: Measure and trim to fit. Adjust height of stair nose using the included shim.

Step 3: Apply a generous bead of construction adhesive along the underside of the stair nose.

Step 4: Carefully place the stair nose against the front of the step. Press down firmly over the
entire stair nose. For added security, complete the installation with finish nails.

Product Dimensions

Length: 94″ (238.76 cm)

Updated on June 16, 2022

Article Attachments