Flush Stairnose for 12mm, 10+2mm, and 8mm laminate. Finishes the end of a step when installing TimberTru plank.
- Used to finish the front edge of steps on a staircase
- Surface material: Wear resistant laminate
- Core material: Moisture resistant MDF
Materials and Tools:
- Tape measure
- Nail set
- Urethane construction adhesive
- Finish nails
- Color coordinated filler
Step 1: Install the flooring leaving a 1 5/8” space from the end of the step for the stair nose installation.
Step 2: Measure and trim to fit.
Step 3: Apply a generous bead of construction adhesive along the underside of the stair nose.
Step 4: Carefully place the stair nose against the front of the step, making sure the transition is in place. Press down firmly over the entire stair nose. For added security, complete the installation with finish nails.
Length: 94″ (238.8 cm)