This specification is issued under the jurisdiction of ASTM International Committee F06 on Resilient Floor Coverings
For the complete text of this standard and other ASTM standards visit the ASTM website at www.astm.org or contact ASTM Customer Service at firstname.lastname@example.org.
This specification covers requirements for the compound and physical characteristics of rubber floor tile.
Class I – Homogeneous Rubber Floor Tile
A. Solid Color
B. Through Mottled
Class II – Laminated Rubber Floor Tile
A. Solid Color Wear Layer
B. Through Mottled Wearlayer
Tile may have smooth, embossed, or molded pattern wearing surfaces.
Materials and Manufacture
Polymeric binder shall satisfy the definition of rubber in Terminology ASTM D 1566 and have been vulcanized such that it becomes as defined in Terminology ASTM D 883.
Hardness: Not less than 85 Shore A
Static Load Limit: Residual indentation not greater than 0.005 inches per ASTM F 970 at 250 psi
Resistance to Chemicals: No more than a slight change in surface dulling, surface attach, or staining against: 5% acetic acid, 70% isopropyl alcohol, 5% sodium hydroxide, 5% hydrochloric acid, 5% sulfuric acid, 5% ammonia, 5.25% bleach, 5% active phenol disinfectant
Resistance to Heat: 7 days at 158oF, maximum color change not greater than 8 delta E
Abrasion Resistance: Weight loss not to exceed 1 gram
Dimensional Stability: Shall not exceed 0.15% MD and AMD
Dimensions and Permissible Variations
Wear Layer Thickness: 0.040 inches minimum
Overall Thickness: 0.080 inches minimum
Thickness Tolerances: (as specified)
Smooth Surface Tile: + 0.005 inches
Molded Pattern Tile + 0.015 / – 0.005 inches
Embossed Pattern Tile + 0.015 / – 0.005 inches
+ 0.016 inches for tiles < 12 by 12 inches
+ 0.018 inches for tiles > 12 by 12 inches but < 24 by 24 inches
+ 0.020 inches for tiles > 24 by 24 inchesSquareness – Not out more than 0.010 inches
Quality of Cut (Joint Tightness): Not more than 0.005 inches
|Use: Commercial and Light Commercial||Certified to ASTM F 1344|
|Rubber Floor Tile||Class I A – Solid Color|